Bhagyalaxmi Industrial
Girgaon, Mumbai, Maharashtra
GST No. 27AAGPD9171K1ZF
TrustSEAL Verified
Call 0804765052692% Response Rate
SEND EMAIL
Product Details:
| Size | 1-5 inch |
| Material Standard | ASTM A105 |
| Usage/Application | Oil Industry |
| Type | SORF , BLRF , WNRF |
| Rated Pressure | 150# , 300# |
| I Deal In | New Only |
| Is It Rust Proof | Yes |
| Country of Origin | Made in India |
Product Details:
| Ouside Diameter of Flange | AS PER CATALOGUE |
| Material | Stainless Steel |
| Flange Type | SORF WITH HUB |
| Usage/Application | OIL & GAS , WATER , CHEMICAL |
| Thickness | STANDARD AS PER CATALOGUE |
| Rated Pressure | 150 |
Product Details:
| Material | Stainless Steel , Carbon Steel , High nickel Alloys |
| Usage/Application | Gas |
| Brand | Bhagyalaxmi Industrial |
| Grade | Stainless Steel,Carbon Steel,High nickel Alloys |
| Material Standard | ANSI B16.5 |
| Types | Slipon Flanges,Blind Flanges,Weldneck Flanges |
| Class | 150#,300#,600#,900#,1500#,2500# |
Additional Information:
Product Details:
| Material Standard | ASTM A105 |
| Material Grade | Astm A105,ASTM A106 |
| Brand | Bhagyalaxmi Industrial |
| Size | 3/4" to 36" |
| Material | Carbon Steel Flanges |
| Grade | ASTM A105,ASTM A106 |
| Color | Black |
| Class Rating | 150#,300#,400#,600#,900#,1500#,2500 |
150 300 400 600 900 1500 2500
150 Class 300 Class 400 Class 600 Class 900 Class 1500 Class 2500 Class
ASTM A182 ANSI B16.5 ASME B 16.5 ANSI B 16.47 DIN FLANGES BS TABLE FLANGES SERIES A SERIES B
A blind flange is a solid flange. The purpose of these is to block off a section of pipe or a nozzle on a vessel that is not used. A nozzle is typically a pipe coming out of a vessel and is usually flanged so it can be connected to valves or piping. Many times a nozzle will be blanked off with a blind flange for pressure tests in a plant, or simply because the customer does not need all the nozzles that were supplied on the tank. The best practice is to use a standard gasket for these blinds. Blind flanges, just like standard pipe flanges, can be raised face RF or flat faced FF. If the flange is RF we would recommend a standard ring gasket that is appropriate for the service and/or test. If it is FF we would TYPICALLY use a full face gasket, because the most common reason the flange is FF is that it is not designed to handle the bending forces that result when using a ring gasket or a RF flange against the FF flange. Again, we treat a blind flange just like any other pipe flange.
Blind flanges are commonly used in petrochemical, pipe engineering, public services and water works.
A blind flange is useful for making repairs to a pipeline further up the line. In fact, during construction of a pipeline, a blind flange may be built into the final length of pipe. This allows for expansion or continuation of the pipeline simply by adding onto the final flange.
Without a blind flange, it would be next to impossible to repair or perform ongoing maintenance to a pipeline unless the flow was shut off at a earlier valve, which could affect miles of pipeline.
The use of flanged pipe has significantly sped up the process for constructing pipelines. It has also made the task of repair and sectional replacement easier. Sections of pipe can now be assembled anywhere in the world and shipped to the job site. Once there, they can simply be bolted in place and the repair is done.
Blinde flens Flange cego Vak karima Flanoarb Blind flans Tutup katup Flange na nDall Flangia cieca Brida ciega Slepa piruba Blindflans Blindflansh Zalepka M bich mu Blann Flange Brida ciega
Export Sea worthy Packing.
Bhagyalaxmi Industrial
Additional Information:
Product Details:
| Material | Carbon Steel ASTM A105 , ASTM A106 |
| Usage/Application | Oil & Gas Industry |
| Brand | Bhagyalaxmi Industrial |
| Grade | ASTM A105,ASTM A106 |
| Material Standard | ANSI B16.5 |
| Type | Slipon Flange with Hub & WIthout Hub |
150 300 400 600 900 1500 2500
150 Class 300 Class 400 Class 600 Class 900 Class 1500 Class 2500 Class
ASME B 16.5 ANSI B 16.47 DIN FLANGES BS TABLE FLANGES
Slip on Flange is essentially a ring that is placed over the pipe end, with the flange face extending from the end of the pipe by enough distance to apply a weld bead on the inside diameter. The OD of slip on flange is also welded on the back side of the flange.
Slip on flange, also called SO flange. It is a kind of flange slides over the pipe with internal design is slightly larger than the pipe. Since the inner diameter of the flange is slightly larger than the outer diameter of the pipe, the SO flange can be directly connected to equipment or pipe by fillet weld at the top and bottom of the flange. It is used to insert the pipe into the inner hole of the flange.
Standard ASTM A105, ASTM A182
Material Carbon Steel Alloy Steel Stainless Steel
Size1/2 to 24 customized up to 60
Pressure Ratings Class 150 to Class 2500
Face Type RF RTJ
Raised Face Slip On Flange
There is a small portion extruded from the bottom face of the slip on flange, this type is raised face slip on flange. The function of this area is to place a gasket seat during installation to get a better sealing performance.
As the pressure ratings bigger the height of this raised face will be bigger.
RTJ Slip on FlangeA small grooved is machined on the raised face part this form is called RTJ type the function of this groove is to place the gasket ring also applied for sealing, compared to RF type RTJ is designed for high pressure use.
ASTM A105 for carbon steel slip on pipe flanges.
ASTM A182 for alloy and stainless slip on flanges. Alloy for F11, F22 stainless for F304/F304L F316/F316L
ASME B16.5 for pipe flanges and flanged fittings.
BS 3293
DIN 86029
Common outer diameters 1/2 2 3 4 6 8 10 12 to 24.
Special made outer diameters Up to 60.
Class range: Class 150 Class 300 400 600 900 1500 2500 or LB. PN 2.5 to PN 250.
Flange face type RF Raised Face RTJ Ring Type Joint
Additional Information:
Product Details:
| Material | Stainless Steel |
| Usage/Application | Industrial |
| Brand | BHAGYALAXMI |
| Grade | STAINLESS STEEL, CARBON STEEL & HIGH NICKEL ALLOYS |
| Material Standard | ASTM A182 |
| TYPE | SLIPON , BLIND , WELDNECK , SPECTACLE , SOCKETWELD , THREADED |
| Country of Origin | Made in India |
Slip-on flanges are very common and are available in a large range of sizes to accommodate systems with higher flow rates and throughput. Simply match the flange to the outer diameter of the pipe you intend to connect. Installation is slightly more technical as you’ll need fillet weld both sides to secure the flange to the pipe.
Used for terminating or isolating piping systems, blind flanges are essentially boltable blank discs. When installed properly and combined with the correct gaskets, they can achieve an outstanding seal which is easy to remove when needed.
Like lap joint flanges, weld neck flanges require butt welding for installation. However, their integrity, performance in systems with multiple repeat bends, and the ability to use them in high-pressure and high-temperature systems make them a leading choice for process piping.
Ideal for smaller pipe diameters in low-temperature and low-pressure scenarios, socket-weld flanges feature a connection in which you place the pipe into the flange and then secure the connection with a single multi-pass fillet weld. This makes this style simpler to install than other welded flange types while avoiding the limitations associated with threaded ends.
Also known as a screwed flange, this style has a thread inside the flange bore which fits with the matching male thread on the pipe or fitting. The threaded connection means you can avoid welding in many use cases. Simply match the threading to the pipes you wish to connect.
Product Details:
| Size | 1-5 inch |
| Material Standard | ASTM A182 |
| Usage/Application | Oil Industry |
| Type | SORF , BLRF , WNRF |
| Rated Pressure | 150# , 300# |
| I Deal In | New Only |
| Country of Origin | Made in India |
Product Details:
| Size | 5-10 inch |
| Material Standard | ASTM A105 |
| Usage/Application | Oil Industry |
| Type | SORF , BLRF , WNRF |
| Rated Pressure | 150# , 300# |
| Country of Origin | Made in India |
Product Details:
| Pipe Size | From 3/4" to 36" |
| Size | From 3/4" to 36" |
| Ouside Diameter of Flange | From 3/4" to 36" |
| Material | Stainless Steel |
| Material Standard | ANSI B16.5 |
| Usage/Application | Oil Industry |
| Type | Slipon,Blind,Etc |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Material | Stainless Steel & Nickel Alloy Steel |
| Usage/Application | Oil , Gas, Water , Sugar , Cement Industry |
| Brand | Bhagyalaxmi Industrial |
| Grade | Stainless Steel & Nickel Alloy Steel |
| Material Standard | ANSI B16.5 |
| Type | Socketweld Flange |
Additional Information:
Product Details:
| Flange Face Type | Weldneck ,Raised Face , Ring Type Joint RTJ |
| Size | 3/4" to 36" |
| Material | Carbon Steel A105,A106 |
| Product Type | Weldneck Flange |
| Usage/Application | Oil & Gas Industry |
| Brand | Bhagyalaxmi Industrial |
| Rated Pressure | 150#,300#,400#,600#,900#,1500#,2500 |
| Grade | ASTM A105,ASTM A106 |
| Material Grade | Carbon Steel |
| Alloy Steel | Carbon Steel |
150 300 400 600 900 1500 2500
150 Class , 300 Class, 400 Class, 600 Class, 900 Class, 1500 Class, 2500 Class
ASME B 16.5 , ANSI B 16.47 , DIN FLANGES , BS TABLE FLANGES
A weld neck flange consists of a circular fitting with a protruding rim around the circumference. Generally machined from a forging, these flanges are typically butt welded to a pipe. The rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts.
Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting.
The long tapered hub provides an important reinforcement for use in several applications involving high pressure, sub-zero and / or elevated temperatures. The smooth transition from flange thickness to pipe or fitting wall thickness effected by the taper is extremely beneficial, under conditions of repeated bending, caused by line expansion or other variable forces.
These flanges are bored to match the inside diameter of the mating pipe or fitting so there will be no restriction of product flow. This prevents turbulence at the joint and reduces erosion. They also provide excellent stress distribution through the tapered hub and are easily radiographed for flaw detection.
This flange type will be welded to a pipe or fitting with a single full penetration, V weld Buttweld.
Additional Information:
Product Details:
| Size | 1-5 inch |
| Material Standard | ASTM A105 |
| Usage/Application | Oil Industry |
| Type | SORF , BLRF , WNRF |
| Rated Pressure | 150# , 300# |
| Is It Rust Proof | YES |
| Is It Corrosion Resistant | YES |
Product Details:
| Material Standard | ANSI B16.5 |
| Usage/Application | OIl,Gas,SUgar,Cement |
| Material Grade | Stainless Steel,High nickel Alloys |
| Color | Black |
| Material | Stainless Steel,Carbon Steel,High nickel Alloys |
| Size | from 3/4" to 36" |
| Grade | Stainless Steel,Carbon Steel,High nickel Alloys |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Material | Stainless Steel, Carbon Steel & Alloy Steel |
| Size | 1-5 inch |
| Brand | Bhagyalaxmi Industrial |
| Material Standard | ANSI B16.5 |
| Usage/Application | Industrial |
| Grade | Stainless Steel,Carbon Steel & Alloy Steel |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Material | Stainless Steel |
| Usage/Application | Gas |
| Brand | Bhagyalaxmi Industrial |
| Grade | Stainless Steel,Carbon Steel,Alloy Steel |
| Material Standard | ANSI B16.5 |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Pipe Size | From 3/4" to 36" |
| Ouside Diameter of Flange | From 3/4" to 36" |
| Material | Stainless Steel , Carbon Steel , Alloy Steel |
| Flange Type | Forged |
| Rated Pressure | 150#,300# . 600#,900 |
| Finish | Polished |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Pipe Size | 1 inch |
| Usage/Application | Gas |
| Material | Alloy Steel |
| Grade | 4130 / 4140 |
| Material Standard | ASTM A182 |
| Flange Type | Forged |